Delivers up to 100W charging via USB-C, fully charging devices like the OPPO Find X6 Pro in approximately 28 minutes.
Features a dual-port design, supporting both USB-C and USB-A outputs for simultaneous charging of multiple devices.
Includes a 1-meter Type-C to Type-C 10A cable, designed for high-speed charging and durability.
Built with advanced safety mechanisms, including overcurrent and overheating protection, ensuring safe and efficient charging
🔧 Key Specs & Features
The 100 W SuperVOOC adapter is a fast‑charging standard that delivers up to 100 watts via proprietary OPPO charging hardware.
It uses a dual‑port charger setup (often USB‑C / USB‑C or with multiple ports) with one port supporting full 100 W charging.
Comes with a 1 meter Type‑C to Type‑C 10A cable (rated for high current) in the official charger box.
Physical size: around 62.5 × 61.0 × 31.0 mm, with foldable angle pins; weighs approx 177 g for the adapter, cable weight ~ 47 g.
✅ Performance
Can charge supported phones (with suitable battery and firmware) from 0 to 100 % very fast — e.g. the OPPO Find X6 Pro with 100 W SuperVOOC.
Supports multiple charging protocols for compatibility: SuperVOOC, VOOC, PD, QC, and PPS. So it works also (at reduced speeds) with non‑SuperVOOC / non‑OPPO phones.
Delivers up to 65W via USB-C and supports multiple fast-charging protocols.
Features 3 ports: 2 × USB-C and 1 × USB-A, with power distribution based on usage.
Compact design with GaN technology, but may block adjacent sockets in power strips.
User reports indicate potential heating issues and concerns about counterfeit units.
Delivers up to 67W fast charging with Qualcomm Quick Charge 3.0 support.
Comes with a 6A USB-A to Type-C cable for high-speed charging.
Compatible with smartphones, tablets, and laptops supporting fast charge.
Features over-voltage and surge protection with BIS certification.
Supports USB Power Delivery (PD) + PPS, with output profiles like 5V×3A and 9V×2.2A for up to 25 W fast charging.
Compatible with a wide range of Pixel models (Pixel 4 through Pixel 7, etc.) and other USB‑C devices.
Often bundled with a USB‑C to USB‑C cable in “adapter + cable” versions.
Built‑in safety features: overcurrent, overvoltage, overheating protections to safeguard devices.
The device ships with an 80W FlashCharge adapter, even though the phone’s supported charging peak is 66W.
You need the original proprietary cable (USB‑A to USB‑C with extra pin) for achieving max charging speed.
In tests, it charges from 0 to ~57% in 30 minutes, and takes ~1h7m for full charge.
The 80W adapter is “over‑specced” and acts as a universal supply—but the phone won’t draw more than ~66W.
Supports USB Power Delivery (PD) 3.0 + PPS, with outputs like 20 V × 1.5 A, 15 V × 2 A, 5 V/9 V × 3 A
Compact design: ~ 59.9 × 48.46 × 26.5 mm, ~ 92 g
The combo version includes a 1 m USB‑C to USB‑C cable along with the charger
In real‑world use, many users report achieving ~20‑25 W (rather than full 30 W), depending on phone, cable, battery state, and thermal throttling
Delivers 65 W fast charging (10 V × 6.5 A) — can charge certain OnePlus phones from 1% to ~58% in 15 minutes.
Also supports USB‑PD / PPS standard (up to ~45 W) for compatibility with non‑OnePlus devices.
Requires good quality Type‑C to Type‑C cable rated for high current to achieve full 65 W.
Built with safety & cooling features — “dedicated circuitry” for heat management, backward compatibility with older OnePlus fast‑charging specs.
Delivers up to 80 W SuperVOOC / Warp Charge for supported OnePlus devices.
Supports universal input 100‑240 V AC, making it suitable for travel globally.
Built with multiple safety protections (overvoltage, overheating, short circuit, etc.).
GaN design (in some variants) keeps it compact while delivering high power.
Official name: Cable (C‑C) from Nothing’s accessory line.
Charging capability: 60 W high-speed charging.
Data transfer: Up to 480 Mbps USB 2.0 speeds.
Length options: Available in 100 cm and 180 cm lengths.
Delivers up to 30 W via USB‑C PD with PPS to support fast charging for Pixel + other PD‑compatible devices.
Outputs include 20V⎓1.5A, 15V⎓2A, and 5V/9V⎓3A via PD; PPS adjustments up to 21V⎓1.5A etc.
Compact design (~59.9×48.5×26.5 mm), weighs ~92 g, made with ~50% recycled polycarbonate.
Wide input range (100‑240V, 50/60Hz), works globally and with many USB‑C devices (phones, tablets).